Bian Die Cast Got a Brand New 1250T COLD CHAMBER DIE CASTING MACHINE

Nov,19 2022

The die casting machine consists of the following parts.

 

(1) Mold closing mechanism

Drive the die casting mold to close and open. When the mold is closed, it has sufficient capacity to lock the mold to ensure that the parting surface of the mold will not expand during the process of injection and filling. The clamping force of the die is called the clamping force (also known as the clamping force), and the unit is kN. It is the primary parameter to characterize the size of the die casting machine.

 

(2) Injection mechanism

Push the metal liquid in the press room at the specified speed, and have enough energy to make it flow through the runner and the inner gate in the mold, and then fill the mold cavity, and then maintain a certain pressure to transfer to the solidifying metal liquid until the formation of die casting. After the ejection action is complete, the ejection punch returns to reset.

 

(3) Hydraulic system

To provide enough power and energy for the operation of the die casting machine.

 

(4) Electrical control system

Control the execution of die casting machine institutions according to the predetermined program.

 

(5) Parts and bases

All parts are combined and assembled to form the whole die-casting machine and fixed on the base.

 

6) Other devices

Advanced die casting machine also has parameter detection, fault alarm, die casting process monitoring, computer-aided production information storage, call, printing and management system.

 

(7) Auxiliary devices

According to the degree of automation equipped with pouring, spraying, take parts and other devices.

 

KSC1250 COLD CHAMBER DIE CASTING MACHINE SPECIFICATION

冷室压铸机1250T主要技术参数表

ITEM

项目

UNIT

KSC1250

Lamping  Unit 锁模部分

Clamping  Force

Closing  Strike

Plate  Sixe(WxH)

Space Between Tie Bars

Tie  Bar Dlameter

DIe Heigeht (Min/Max)           

锁模力

锁模行程

模板尺寸

哥林柱间距内尺寸

哥林柱直径

压模厚度(最小最大)

kN

mm

mm

mm

mm

mm

12500

10000

1740×1740

1100×1100

230

450-1200

Injection  Unit射料部分

Working Pressure

Casting Force

Intensifier

Casting Stroke

Plunger Tip Penetration

Shot Position

Plunger Diameter

Shot Weight

Foundry pressure

Casting Area

Max Cast Area (ASSUME PRESSURE 400kg/sp.cm)

Ejecting Force

Ejecting Stroke

工作油压

射料力

增压力

射料行程

锤头推出距离

射料位置

锤头直径

射料重量

铸造压力

铸造面积

最大铸造面积(铸造压力400kg/ cm2计算)

顶出力

顶出行程

MPa

kN

kN

mm

mm

mm

mm

kg

kfg/cm2

cm2

cm2

 

kN

mm

140

400

1080

890

330

0-160-320

100、120、140

13、17、25.4

1380、770、700

910、1350、1785

3150

580

210

Electrical  System 电器部分

Motor For Hydraulic  Pump 电机

KW

2×(50/37)

Others 其它

Oil Tank Capacity

Dimension Of Machne

(including auto lading)

Weight Of Machine

(including auto ladling device)

油箱容量

机身尺寸(连机械手)

出机重量(连机及机械手)

Litre

(lxWxh)m

kg

2350

10950×3300×4350

88500